How to charge the watch?

The CS Watch has an integrated rechargeable battery and is charged by placing the watch in the cradle.

1. Plug the cradle charger into the mains.
2. Place the watch in the cradle matching the 4 golden contacts on its back to the 4 golden pogo-pins in the cradle. The cradle has magnets that help with positioning the watch correctly

While charging, the sensors are disabled, and the display shows the current battery level.

• Charging time (empty battery to fully charged battery) is around 2 hours.
• Under typical conditions, a fully charged battery provides up to 2 days (48 hours) of continuous usage.

When the low battery indicator turns on, charge the battery.

When the battery reaches 10%, the watch screen turns off, and the watch enters a deep-sleep mode. When the battery depletes faster than expected, the battery should be replaced. The battery life is ~2 years, depending on use.

Battery replacement should be performed only by an authorized technician. Contact CardiacSense or your local distributor for details.